恒泰源聚氨酯

We focus on polyurethane for shoe sole

 

ZG-P-5080/ZG-I-5002

Product serial number
Quantity
-
+
Stock:
Product description
Parameters

牌号( Shop sign): ZG-P-5080/ZG-I-5002

1. 特性:中硬度,中高密度

Application: Meduim to High hardness, Meduim to High density.

2. 用途:适用于男女休闲鞋,皮鞋鞋底的生产

Characteristic:. Suitable for female high-heeled shoes production

3. 原液特性Typical properties of pu resin

品   名

Name of products

外   观

Appearance

粘   度Viscosity(Pa·s/50℃) 密   度Density(g/cm3/40℃) 包  装Packge(kg)
ZG-P-5080 白色或淡黄,液状无异物White or pale yellow,liquid foreign material 0.40-0.80 1.16-1.20 18
ZG-I-5002 透明液体无异物Tranparent and pure liquid 0.10-0.30 1.18-1.20 20

参考发货配比(Reference shipments ratio):A/B=27/26(桶)

 

4. 成型条件及物性值(Typical processing parameters& Typcal properties):

测试项目Test item 参考物性值Physical properties
鞋底成型密度Molded density(g/cm3 0.45~0.55
硬度(A型)Hardness(type A) 40~55
拉伸强度Tensile strength(MPa) 3.0~5.0
伸长率Elingation(%) 300~400
NBS耐磨Wear(%) ≥10%
自由泡密度Free rise foam density(g/cm3 0.25~0.30
耐折性(常温)(4万次裂口长度,mm)Folding(room temperature)(40,000 gap length mm) <8

●配合比率是以最佳配比值为基础,此配比值会随添加的颜料助剂种类和添加量不同而变化。

With the best ratio is based on the ratio, the ratio of value added with The type and quantity of paint additives vary.

●自由泡沫密度会依季节(温度,湿度)的不同而变化。

the free foam density according to the seasons (temperature, humidity) vary

●脱模时间会随成型品厚度的增加而延长。

Ejection time with the increase of the thickness of molded extension

●耐折条件:屈挠角度为 90度,频率为80次/min*4万次。

Folding conditions: angle of 90 degrees of flex, frequency of 80 times / min * 4 million

● 以上数据仅作参考,具体数据以实际操作为准。如需其他物性指标,请与我公司联系。

Data listed above are just for reference .The detail data are subjected to practical operation.If other requests for physical properties,please contact us.

We could not find any corresponding parameters, please add them to the properties table

Add:

No.1 Road,Industrial Zone, Wenling City,Zhejiang Province

       

中文   PT
ES      RU

Copyright © Zhejiang Hengtaiyuan PU Co.,Ltd Copyright  浙ICP备20019453号 

中文 |EN | PT | ES | RU

搜索
Search